Get started with Sealer2100 – Sealer2100

This tutorial will guide you through configuring your Sealer2100 hardware wallet, helping you manage your cryptocurrency assets securely and reliably.

Please note: Before beginning configuration, carefully inspect the packaging and security labels to ensure the device is in perfect condition. Your package should not contain any pre-set PINs or recovery phrases; if any are found, immediately stop using the device. If you have any questions, please contact Sealer2100 customer support for assistance.

You will need

Sealer 2100 hardware device
Download and install the HPX Wallet client
Use the included mnemonic flashcards or bring your own paper and pen for backup

Steps

The HPX Wallet App mobile client supports connecting to hardware wallets via Bluetooth.

Step 1: Turn on the computer and select the language

Press and hold the power button for 3-4 seconds to turn on your Sealer2100 device.
Follow the on-screen instructions to select your preferred system language.

Step 2: Create a new wallet

Select "Create New Wallet" and click "Continue" to initialize your new wallet.
Select the number of mnemonic phrases you want (12 is used as an example below).

Step 3: Set up security verification

Read the on-screen instructions and select "Continue" to begin setting up your security verification method.
You can choose to enable either a PIN or iris verification, or a combination of both.

Set a PIN

Enter your new PIN and select ☑️ Done.
Enter your PIN again and select ☑️ Continue.

Iris Entry

Click "Iris Enrollment"
The Iris component will begin collecting your iris data.
Follow the Iris Enrollment prompts to complete the registration process.
After your iris data has been successfully enrolled, click "Continue."

Safety Tips

Both a PIN and iris scan can protect your hardware wallet. For ultimate security, we recommend enabling both.
If you fail security verification ten times in a row, your hardware wallet will be reset.
Avoid using any device with a preset PIN or recovery phrase.
If you have any questions, please contact Sealer2100 customer support.

Step 4: Verify/Backup Your Recovery Phrase

Use a blank sheet of paper to write down your 12 mnemonics according to the on-screen instructions. (When you're finished, back them up on the backup sheet included in the box.)
Please read the precautions carefully before backing up your mnemonics.
Please copy them down in exact order. Do not take photos, upload them, or send them online.
Repeat this process until you've written down your last mnemonic, ensuring you've copied each one correctly.
When the screen shows "Almost Complete," press "Continue" to proceed to verify your mnemonic phrases.

When prompted on your device's screen, verify the corresponding mnemonic phrase you wrote down on your recovery card by selecting the correct word.
Repeat this process until "Verified" appears, then press "Continue."

Safety Tips

Your recovery phrase is the only way to recover your assets.
We recommend using the included recovery phrase backup plate. Do not save any electronic copies or upload your recovery phrase online.
Please keep it safe.

Step 5: Connect to the HPX Wallet App

Scan the QR code or visit sealer2100.com/app to download and install the HPX Wallet app (if you've already installed it, you can skip this step).
Launch the HPX Wallet app, navigate to your Web3 wallet, and select "Connect with Hardware."

Select "Sealer2100".

Connect by turning on Bluetooth or scanning a QR code.
Once the hardware unlock is confirmed, follow the instructions and wait a few moments for the connection to complete.

Click on your device name (for example: Sealer2100 A88F).

Enter your pre-set PIN on your Sealer 2100 device or unlock it with your iris.
Enter the Bluetooth pairing PIN displayed on the Sealer 2100 hardware in the HPX app.

Continue to click Confirm on your Sealer2100 device to begin the Device authentication process (this check is used to confirm whether your device has been tampered with).

When the screen displays "Verification successful", click "Continue"

Sealer2100 will generate a wallet account for you.
Once the account is created, you will see the account details page (as shown below), indicating that your wallet has been successfully connected to the HPX app.

Congratulations! Your Sealer2100 wallet is ready to use.

Please note: This tutorial is designed to help you quickly complete the basic setup of the Sealer2100. It does not cover advanced features such as iris recognition, passphrase, or AirGap mode. However, don't worry; after completing this tutorial, you can still manually enable these advanced features as needed.